Toro Stump Grinder SGR-13 22615HD 2017 Belt Guard Replacement

ID: 139259

Description: Follow this guide to replace the belt guard on...

Steps:

1. Before you begin, ensure the machine is powered down and cool to the touch.
2. Turn the ignition switch to the off position.

3. Flip the fuel cutoff valve switch into the off position.

4. Grab the plastic housing at the end of the spark plug wire.
5. Pull firmly to disconnect the wire from the spark plug.

6. Tilt the machine so that it is resting on the handle with the cutter wheel raised.

7. Use a 14 mm socket to remove the fasteners securing the belt guard:
8. One 10 mm bolt
9. One 10 mm nut

10. Remove the belt guard.