SILVERCREST Monsieur Cuisine Connect SKMC 1200 Spring Pot Lock replacement

ID: 139572

Description: These instructions are used to replace the spri...

Steps:

1. Remove the lid from the pot of the SILVERCREST Monsieur Cuisine Connect before processing
2. The instructions are identical for both sides.
3. Place the pot on the work surface with the opening facing down
4. Open and remove the screw cap

5. Remove the Phillips head screw

6. The lower part is fixed, pay close attention to the order of removal.
7. Remove the cover by first pulling on the top edge.
8. Then turn the cover to the right or left out of the fixation

9. The springs can look different depending on their condition. Sometimes they may not even be present. Note that all spring leftover parts must be removed.
10. Place the cover with the open side up in front of you
11. Remove the first spring with a suitable tool

12. Remove the Phillips head screw
13. Remove the second spring with a pair of needle nose pliers.

14. Insert a new matching spring.
15. A 25mm (1inch) spring is recommended.
16. Most springs are too long. Shorten them using a pair of pliers.

17. Attach the second smaller spring with the Phillips head screw
18. The correct size of this spring is vital!. The lock must be completely withdrawn in normal condition.
19. Recommendation here is a 5mm spring

20. Attach the other end of the spring to the movable part of the locking mechanism