DeLonghi ECAM back panel removal

ID: 139768

Description: For most repairs, the machine must be opened....

Steps:

  1. Unplug the power cord!
  2. Remove all attachments such as water tank, pulp drawer, brew group.
  3. Turn the machine with the back facing you.
  4. Remove five Torx T20 security screws.
  5. A small hurdle: These screws have a pin in the middle, so the screwdriver must have a hole.
    6. Step image
  6. Lift out the back.
  7. The following components are immediately visible:
  8. grinder
  9. pump
  10. flowmeter
    11. Step image Step image
Back