DeLonghi ECAM Series left side panel

ID: 139769

Description: For most repairs, also the left side panel has...

Steps:

  1. Unplug the power cord!
  2. Remove all attachments such as water tank, pulp drawer, brew group.
  3. Turn the machine with the back facing you.
  4. Remove five Torx T20 security screws.
  5. A small hurdle: These screws have a pin in the middle, so the screwdriver must have a hole.
    6. Step image
  6. Lift out the back.
  7. The following components are immediately visible:
  8. grinder
  9. pump
  10. flowmeter
    11. Step image Step image
  11. Push the side panel back about 1.5 cm.
  12. Lift off the panel.
  13. The following compononents are exposed:
  14. Heater
  15. Expansion chamber
  16. Gear drive
  17. Steam valve
    18. Step image Step image Step image
Back