Nerf Surgefire trigger replacement

ID: 139825

Description:

Steps:

1. Unscrew all screws in the blue and gray area.
2. Remove the blue and gray part.

3. Unscrew all 3 screws holding down the white trigger cover (the trigger guard may be a different color).
4. Remove the trigger cover.
5. This image shows a Surgefire in working condition.

6. Here you can see how it looks when the trigger won't operate:
7. An "intermediate piece" is not in the right place or has fallen off.
8. Place the "intermediate piece" in the correct position (see photo 2).
9. Do not be surprised if the "intermediate piece" slides up a little. It is pressed down when the trigger guard is screwed back on.
10. In picture 3, you can see what it looks like when the part is in the correct place.

11. To reassemble your device, follow these instructions in reverse order.