Dell XPS 13 9300 Battery Replacement

ID: 139881

Description: This guide shows how to remove and replace the...

Steps:

1. Use a T5 Torx screwdriver to remove the eight 3.3 mm screws securing the case.

2. Insert an opening pick between the lower case and the chassis on the front right edge.

3. Slide the pick along the front edge to release the clips securing the lower case.

4. Continue sliding the opening pick along the perimeter of the lower case to release the remaining clips.

5. Lift the lower case from the chassis and remove it.
6. During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.

7. Grip the pull tab on the battery connector with your fingers and gently pull away from the socket to disconnect it.
8. After you disconnect the battery, some of your laptop's startup (BIOS) settings will revert to their defaults.
9. You may need to run BIOS setup to reset the system clock as well as any specialized disk settings before you can boot up your XPS.

10. Use your Phillips screwdriver to remove the five 2.8 mm-long screws securing the battery.

11. Remove the battery from its recess.