Dome Ceiling Light Bulb Replacement
ID: 140001
Description:
Steps:
- Find the dim or blinking light in your household that needs to be changed.
- Gather the material that you will be using like shoes, rags, and plastic gloves.
- Put new light to the side to avoid mixing up with old light.
- Using the rubber sole of the shoe bump the dome lid in a clockwise direction to loosen the dome lid
- CAUTION: If using a shoe to gain traction on your dome lid, do so with extreme caution so you don't break the light.
- Now using your hand, remove the dome lid by turning you wrist in a clockwise direction.
- Check light for dust, and bugs that got inside
- Make the rag wet as you will be needing it to clean the light dome.
- Clean the top and bottom of the dome light to insure there wont be any spots in light when put back.
- Turn on light in order to find witch light has burned out.
- Safely pull out light after you have turned off the light switch. Also keep in mind where the holes are when you remove the old light.
- Place in new light and make sure that you have it in firmly to avoid any accident.
- Turn on the light to make sure that the new light is not defective and works properly.
- Place the cover back on the light and twist counter clockwise as much as you can.
- Using the shoe tighten the light until it doesn't move anymore. We don't want the light to fall out sudden and cause injury.
- Once again clean the dome cover to remove shoe scuffs
- Watch your new light glow
