How to Repair a Cracked Windshield

ID: 140069

Description: If you have a crack or dent on your vehicle’s...

Steps:

1. Place the repair device so it is centered over the impact point.

2. Screw the resin chamber piece into the center ring until it makes contact with the impact point.

3. Squeeze 3-6 drops of the repair resin into the resin chamber.

4. Screw the pressure driver piece into the resin chamber to push the resin into the impact point.
5. Wait 4-6 minutes.

6. Unscrew the pressure driver piece and remove it from the repair device.
7. Verify that the repair resin has been absorbed by observing the impact point from the inside of the vehicle. If not repeat steps 4-5.

8. Remove the entire repair device.
9. Apply an additional drop or two of repair resin directly onto the impact point.
10. Cover it with a curing strip.
11. Wait 5-10 minutes to let it dry.

12. Remove the curing strip by carefully scraping it off with the razor blade.
13. Handle the razor blade carefully to prevent any injuries.