Yamaha FG-425 Guitar String Replacement

ID: 140259

Description: This guide will show you simple steps on how to...

Steps:

1. Turn the tuning peg clockwise using the All-In-1 Restringing Tool’s peg winder to loosen the tension of the strings.
2. Unwind the string from the tuning post and remove the string.
3. Caution: Be careful when removing the string from the tuning post because you may hurt your fingers while doing so.

4. Use the pin remover in the All-In-1 Restringing Tool to remove the pin from the bridge
5. Remove the string from the bridge hole.

6. Bend the string end on the string ball.
7. Place the string into the bridge hole.

8. Place the bridge pin into the bridge hole.
9. Gently pull the string while pushing the pin into the hole.

10. Insert the string through the tuning post hole.
11. Pull the string about half an inch or an inch through the tuning post.
12. Ensure that the string is lined up with the nut.

13. Use the All-In-1 Restringing Tool's peg winder to turn the tuning peg counterclockwise to slightly tighten the strings.

14. Cut any excess strings on the tuning post using the All-In-1 Restringing Tool’s clippers.