Anker SoundCore 2 Microphone Replacement

ID: 140280

Description: This is a step by step guide on replacing the...

Steps:

1. Insert a spudger between the front panel and the body of the speaker.
2. Pry around the edges of the front panel with the spudger to pry it away from the speaker body.

3. Remove eight 10 mm screws from the speaker mount using a Phillips #0 screwdriver.
4. Insert a spudger in the gap between the speaker mount and speaker body to remove the speaker mount.
5. Flip up the speaker mount panel from the speaker housing case.

6. Disconnect the microphone wire from the motherboard.
7. Use a spudger to pry the microphone out of the speaker mount panel.
8. The microphone is held in place with glue, so you may need to re-glue the new microphone onto the speaker mount panel.