Samsung Mythic SGH-a897 Ear Speaker Replacement

ID: 14132

Description: Use this guide to replace the ear speaker of...

Steps:

  1. To remove the phone's back cover, slide your fingernail into the slit at the bottom of your phone.
  2. Step image
  3. Place your finger on either bottom corner of the battery slot and lift to remove the battery.
  4. Step image
  5. Using a Phillips #00 Screwdriver, remove the six 5 mm screws from the back casing of the phone.
  6. Step image
  7. Using the iFixit Opening Tool, insert the tool into the seam between the back case and the rest of the phone.
  8. Working along the seam, pry the back casing from the phone.
  9. Step image
  10. Carefully remove the camera by using the iFixit Tool to pry the camera cable from the motherboard.
  11. Carefully remove the camera from the phone's motherboard.
  12. Step image Step image
  13. Using a Phillips #00 screwdriver, remove the two 3.8mm screws.
  14. Step image
  15. Using tweezers, firmly grip the black lever at the bottom of the motherboard.
  16. Use the tweezers to flip the black lever up so that it is upright from the motherboard.
  17. Step image Step image
  18. Remove the ZIF cable by carefully using the tweezers to pull the cable straight out.
  19. Step image
  20. On the right from the lever, use the tweezers to unclip the black connector.
  21. Step image Step image
  22. Use the tweezers to unclip the orange ribbon cable from the left side of the phone.
  23. Step image Step image
  24. Use the tweezers to unclip the other orange ribbon cable along the left side of the phone.
  25. Work carefully, as this is a very delicate part of the phone's motherboard that can easily be broken.
  26. Step image
  27. Using either side of the tweezers, slide a side of the tweezer underneath the red and blue wires and the capacitor.
  28. Carefully lift the capacitor away from the phone.
  29. Step image Step image
  30. DO NOT remove the motherboard completely. One more clip on the motherboard's backside needs to be removed.
  31. Carefully tilt the motherboard up from the back of the phone.
  32. Use tweezers to unclip the black connector.
  33. Step image Step image
  34. Use the tweezers to unclip the connector.
  35. Remove the daughterboard.
  36. Step image Step image
  37. Use tweezers to unclip the silver connector.
  38. Then put pressure on the black latch which is circled to release the speaker.
  39. Step image
Back