Toshiba Satellite A205-S4577 USB 3.0 ports Replacement

ID: 14135

Description: If you have a compatible motherboard, a USB 3.0...

Steps:

1. Locate the two sliding locks indicated in the photo.
2. Slide the right lock (labeled "1") to the right. It will remain in the unlocked position.
3. Slide the left lock (labeled "2") to the left and hold it in place.

4. While holding the left lock, place your finger in the indentation next to the battery and lift the battery out.

5. Remove the four screws indicated in the photos using a Phillips 00 Screwdriver. Left to right: 6mm button-head, 3mm flat-head, 6mm button-head, 6mm button-head.

6. With your hands, grasp the speaker cover on the edge nearest to the screen.
7. Pry the speaker cover upward.

8. Remove the speaker cover. Your laptop will look like this photo when the speaker cover has been removed.

9. Locate the screws that are shown in the image.
10. Remove the fourteen 6mm button-head screws with a Phillips 00 Screwdriver.

11. Lift up on the front cover to remove it.

12. Locate the USB 2.0 cable on the bottom right corner of the laptop.

13. Locate the white slot on the left side of the USB 2.0 wire.
14. Carefully detach the wire by pulling the cable to the right of the slot.