Softball Glove String Replacement

ID: 141874

Description: If your softball glove has a broken string, you...

Steps:

1. Tie a knot at one end of the string.

2. Put the string through the loop of the leather needle.

3. Push the needle through the first hole on the backside of the pinky finger.

4. Pull the string out of the needle and back the needle out of the hole.

5. Pull the string all the way through and reinsert the string into the needle.

6. Push the needle through the bottom hole on the ring finger.
7. Pull the string out of the needle and all the way through the hole. Back the needle out of the hole.

8. Insert the string back into the needle and push it through the bottom hole on the pinky.
9. Pull the string all the way through and remove it from the needle.

10. Pull the string under the loop, making an X.

11. Put the string through the needle and push the needle though the top hole on the ring finger.
12. Pull the string all the way through and remove it from the needle.

13. Going around the back of the ring finger, insert the string through the top hole on the left side of the ring finger.
14. Pull the string all the way through.

15. Insert the string through the bottom hole on the middle finger.
16. Pull the string all the way through.

17. Cross over the backside and insert the string into the bottom hole on the left side of the ring finger.

18. Pull the string under the loop to make an X.

19. Push the string through the top hole on the right side of the middle finger.
20. Pull the string all the way through.

21. Going around the back of the middle finger, insert the string into top hole on the right side of the middle finger.
22. Pull the string all the way through.

23. Insert the string into the bottom right hole on the pointer finger.
24. Pull the string all the way through.

25. On the backside, push the string through the bottom left hole on the middle finger and pull the string all the way through.

26. Pull the string under the loop, making an X.

27. Insert the string into the top right hole on the pointer finger and pull the string all the way through.

28. Tie the end of the string close to the glove.
29. Cut off the excess string.