2014-Present Kia Soul Brake Light Replacement

ID: 141884

Description: If you become aware that the brake light of...

Steps:

1. Open the car trunk.

2. Use a Phillips #2 screwdriver to remove the four 20.0 mm screws from the tail light assembly.

3. Pull the tail light assembly off.
4. Apply a counterclockwise motion on the tail light while you are pulling it off.
5. Do not use too much force to prevent cracking the plastic lens.

6. Turn the brake light socket 1/4 counterclockwise and pull it from the tail light assembly.
7. The brake light is located at the bottom of the tail light assembly.

8. Press the light bulb down and turn it 1/4 counterclockwise.

9. Pull the light bulb out of the socket.

10. Press the new light bulb down into the socket and turn it 1/4 clockwise direction.
11. Before performing this action make sure you properly place the light bulb into the socket.

12. Follow the guide in reverse order to put the socket and the tail light assembly back.
13. Before you screw the tail light assembly back have someone press the brake paddle to see if the new light bulb turns on.