Penguin FZ-8 28” Tower Fan Blade Replacement

ID: 141893

Description: This guide is explaining how to properly fix a...

Steps:

1. Flip the fan onto its side so that you can access the base of the fan.
2. Remove the single 11 mm screw using a Phillips #1 screwdriver.

3. Rotate the base of the fan counter-clockwise to detach it from the rest of the fan. The base can be separated into two parts.

4. Remove four 5 mm screws from the sides of the base of the fan using the Phillips #1 screwdriver.

5. Remove the two 5 mm screws located on the outside of the case inside the holes using the Phillips #1 screwdriver.

6. Remove a single 5 mm screw on the outside cover of the fan using the Phillips #1 screwdriver.
7. Gently lift the top cover of the fan halfway to expose the single 5 mm screw. Remove this screw using the same Phillips #1 screwdriver.

8. Pinch the sides of the case to remove the case from the rest of the fan.

9. Remove the single 5 mm screw between the fan blade and the motor using the Phillips #1 screwdriver.

10. Remove the two 5 mm screws holding the fan blade in place using the Phillips #1 screwdriver.

11. Remove the fan blade from the device and clean it off before reassembling your device.