Wheelbarrow Handle Replacement

ID: 141923

Description: Wheelbarrow handles rot or even break after...

Steps:

1. Remove the screws from beneath the handles to detach them from the wheelbarrow.

2. Measure and record the following dimensions of the wheelbarrow handle:
3. Length,
4. Width,
5. and Thickness.
6. Use the recorded dimensions of the wheelbarrow hand to purchase a new handle.

7. Align the ends and sides of the old handle with new handle.
8. Use a bolt from the wheelbarrow and a hammer to mark the new handle with the location of the old handle's holes.

9. Use the marked locations from Step 4 to drill holes with the 5/16 drill bit.

10. Turn the wheelbarrow shell on its side and put the bolts though the shell and handle.
11. Attach the legs, axel assembly, and wheel guard to the shell and handles.
12. Keep all screws loose until all pieces are in place.
13. Tighten all screws.
14. If you are unsure how to reassemble your wheelbarrow, there could be assembly instructions for your wheelbarrow on the company website from which you purchased your wheelbarrow.