How to Add a Hole to a Belt

ID: 141925

Description: Use this guide if you have a belt that is no...

Steps:

1. Wrap the belt around yourself.
2. Mark with a pen, pencil, or marker where the hole should be placed.

3. Use a tape measure to center the hole in the middle of the belt.
4. Make sure the hole is in line with the previous hole as well.

5. Grab a hand drill with a circular bit similar to the size of the current belt holes.
6. For reference, a 5/32 bit was used here.

7. Place the belt over a scrap piece of wood or on a material that can be drilled on.

8. Drill all the way through the belt where it has been marked.

9. Move the drill up and down a few times in place to ensure the hole is smooth around the edges.
10. Be sure the belt buckle fits in the new hole.