How to Fix a Chair Armrest

ID: 141926

Description: If you have a wooden chair with the armrest...

Steps:

1. Remove the armrest from the chair using a hex wrench screwdriver and a drill to remove the screws.
2. You can also use a screwdriver instead of a drill.

3. This is the chair that we will fix, and the armrest that was broken.

4. Sand just the inside tip of the armrest as shown.

5. Apply a little bit of glue on the part that you sanded.
6. It is fine if you do not want to use glue.

7. Put the screw washer on the screw.

8. Insert the screw inside the hole on the inside of the chair body.
9. Have another person attach the armrest and then screw it with your hand.

10. Insert the screw into the end of the armrest, attaching it to the edge of the back of the chair using a drill.
11. You may also use a screwdriver instead of a drill.

12. Tighten up the screw with a hex wrench screwdriver.

13. All done! Now your armrest should feel securely attached to the chair.