2007-2012 Acura RDX Engine Air Filter Replacement

ID: 141928

Description: There are many small particles in the air that...

Steps:

  1. On the driver-side footwell, pull the latch to open the hood.
  2. Make sure you leave time between driving and performing this fix. Working around the engine while it is still hot presents a burn risk!
  3. Step image
  4. Lift up the second latch to fully open the hood.
  5. This one is located right above the Acura logo on the front of the car.
  6. Step image
  7. The airbox is directly behind the battery. Remove the four 9 mm bolts holding the airbox down.
  8. If you ever had the bolts replaced, they may have a slightly different head diameter. If a 9 mm socket doesn't fit, use the appropriate size socket.
  9. Step image
  10. Unscrew each of the bolts. Do not remove the bolts.
  11. If the bolts are stuck, use some WD-40 or similar lubricant to help loosen them.
  12. Step image
  13. Remove the air filter from the vehicle.
  14. In many cases, air filters will have an arrow to show the direction they should go. This direction represents the airflow, for this particular car we want that facing upwards.
  15. Do not fully remove the bolts.
  16. Step image Step image
Back