Dell Inspiron 15 7590 2-in-1 Keys Replacement

ID: 141941

Description: A spoiled laptop key can be very annoying to...

Steps:

1. Position a spudger between the key cap and its hinge.
2. Push up with steady force to snap the key cap away from the hinge.
3. Use a spudger to pry under the corners of the hinge to remove it.
4. Remember the orientation of your key hinge and which holes go to the upper metal holders.

5. Align the new hinge with the metal holders on the keyboard.
6. Push the hinge into place and lock it onto the metal holders.
7. Make sure the hinge lies flat on the metal holders. If it doesn't, check the orientation of the hinge.

8. Flip the key cap over and determine the positions of the spikes jutting out.
9. Align the spikes with the holes on the hinge and press the key cap onto the hinge.

10. Press down on the key to snap it into place.

11. To replace big keys, examine the other side of the key cap and locate the metal wires attached to the holders on the back of the key.
12. Examine the space the key will enter, and locate the metal holders with holes in them.
13. Position the key so all the metal ends can enter a hole and insert the metal ends into the holes.
14. Push down on the key and adjust the keycap to make sure its metal attachments slide into their holders.