Razer Deathadder Elite Feet And Grips Replacement

ID: 141942

Description: If your Razer Deathadder Elite is not gliding...

Steps:

1. Peel the mouse foot away with the tweezers. Repeat for all the mouse feet.

2. Apply isopropyl alcohol to each of the areas where the mouse feet were.

3. Peel the replacement foot away from the sticky paper and make sure to not touch any of the glue underneath.
4. Align one of the edges of the replacement foot and with the mouse.
5. Place the foot onto the mouse and apply pressure for one minute so the glue sets.

6. Lift the white paper/film off of the back of the mouse foot with a pair of tweezers to ensure proper gliding on the mouse pad. Repeat for each of the mouse feet.

7. Rotate the mouse 90 degrees counterclockwise and peel away the old mouse grips.

8. Peel away the grip from the sticky paper.
9. Potential for device damage: Do not touch the bottom of the grip, otherwise the glue will be less effective.
10. Align one of the edges of the grip with the corresponding edge on the mouse and press firmly on it for 30 seconds once placed.