Acer Nitro 5 AN515-55 SSD Replacement
ID: 142044
Description: Use this guide to replace a Solid State Drive...
Steps:
- Shut down your laptop.
- Make sure your laptop is completely turned off to prevent damaging other parts.
- Flip the laptop on its back.
- Remove the eleven 8 mm screws securing the back cover using the Phillips #1 screwdriver.
- Loosen the back cover using a plastic opening tool.
- Pull the back cover off and put it in a safe place.
- A little bit of force is needed to pry open the clips at the corners of the laptop.
- Remove the 2.6 mm screw that is holding down the SSD with a Phillips #0 screwdriver.
- Make sure to ground yourself before working on the motherboard to prevent damage.
- Gently pull out the damaged SSD.
- Slide in the new SSD.
- Screw it in place.
- Put the back cover on and gently snap the clips back in.
- Screw the back cover in place.