Toy Lightsaber Battery Replacement

ID: 142127

Description: If your toy lightsaber needs new batteries,...

Steps:

1. Remove the Lightsaber blade by carefully twisting it off the hilt.
2. Be gentle during this process to avoid damaging the blade or the hilt.

3. Use a Phillips #2 screwdriver to remove the 3.5 mm screws on the hilt.

4. Remove the old C batteries.
5. If the batteries were leaking, be sure you thoroughly clean the inside of the hilt with a pair of tweezers to scrape off the battery acid and wipe away any acid that remains with a tissue or napkin.
6. Battery acid is toxic and dangerous for your health. Wear gloves to protect yourself.

7. Place the new C batteries inside the newly cleaned hilt.

8. Use your Philips #2 screwdriver to screw the 3.5 mm screws back into the hilt.

9. Lastly, twist the Lightsaber blade back on top of the hilt.
10. Press the red button on the hilt to test if the blade glows.
11. If the blade doesn't glow, start over and try again with different C batteries.