PlayStation VR Processor Unit Thermal Pad / Fan Replacement

ID: 142614

Description: This guide applies to the CUH-ZVR2 processor unit.

Steps:

  1. Place the PlayStation VR processor unit with the I/O (back) side facing up.
  2. Peel the sticker up with a fingernail or a pry tool.
  3. Remove the single J0 screw.
  4. Place the screw in a parts tray to keep it organized.
    5. Step image Step image
  5. Use an opening tool to separate the bottom cover from the top.
    6. Step image Step image Step image
  6. Remove the eight J0 screws.
  7. Place the screws in the parts tray
  8. Use your tweezers to disconnect the fan connector from the motherboard
  9. If the fan needs to be replaced, stop here and follow in reverse.
  10. Fan details.
  11. Brand: Nidec
  12. Model and dimensions: U35x05m 52aa7-56j14
  13. Power: 5v and .18a
    14. Step image Step image Step image
  14. Use a spudger or a fingernail to lift the pcb in the direction highlighted
  15. Gently separate the metal plate from pcb
  16. Replace the thermal paste if needed.
  17. Use a fingernail or a pry tool to see if the thermal pad is still soft. that means it still conducts heat. if hard, remove and replace the thermal pad
    18. Step image Step image Step image
Back