How to fix squeaking on the GEN 2 Wheelchair

ID: 14288

Description: This guide will show how to fix squeaking on...

Steps:

1. Locate the source of the squeaking.
2. Typically, this will be one of the rear wheels, castor wheels, or brakes.
3. Clean and remove any dirt or rust from the source of the squeaking.
4. You may need to partially disassemble the squeaking part in order to thoroughly clean it.

5. Check for improper assembly.
6. Refer to the teardown to check that the wheelchair is properly assembled.
7. Check for proper lubrication. If not lubricated, lubricate thoroughly with bike grease.

8. Check to see if the squeaking has stopped by rolling the wheelchair around.
9. If the squeaking continues, recheck the chair thoroughly to locate the problem. Once located, repeat the steps until squeaking has stopped.