Philips DC320 37 Speaker Replacement

ID: 14371

Description: Follow the procedure outlined in this guide to...

Steps:

1. Pry off the four white feet with the pointed end of the spudger

2. Gently unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.

3. Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.
4. The connectors on the panel are fragile and may break.

5. Carefully pull up and out the four electrical connectors and two ribbon connectors that connect the bottom panel to the dock.
6. Electrical Connectors
7. Ribbon Connectors
8. The cables do not have a lot of slack in them. Be careful not to break the connectors.
9. One wire is soldered onto the bottom panel. Be careful not to break this bond.

10. Unscrew the two 6 mm Phillips #00 screws attaching the back panel to device.

11. Slide the back panel towards top of the device and lift away from the device to detach back panel.

12. Unscrew the four 16 mm Phillips #2 screws attaching the speaker unit to device.

13. Slide the speaker towards the bottom of the device to remove.