Motorola Q700 Sidekick Speaker and Camera Replacement

ID: 14413

Description:

Steps:

  1. When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.
  2. Step image
  3. Turn the phone face-down. Remove the back cover, exposing the battery.
  4. Use the Plastic Opening Tool to pry the battery out of the phone.
  5. Step image
  6. Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.
  7. Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.
  8. Step image
  9. After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.
  10. Step image
  11. Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.
  12. Step image
  13. On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.
  14. Step image
  15. You should now have all of the pieces separated and disassembled for your device.
  16. Step image
  17. complete dissassembly as instructed by guide
  18. Step image
  19. Remove camera piece from casing
  20. Step image
  21. replace with new camera piece into casing and reassemble by reversing dissemble procedure
  22. Step image
Back