2011-2017 Hyundai Veloster Back-Up Light and Brake Light Replacement

ID: 145018

Description: It is crucial to replace your back-up and brake...

Steps:

1. Make sure the car is off before you start your replacement. However, You don't have to disconnect the car battery.
2. Open the trunk first.
3. Using Phillips #2 screwdriver, remove the two 10 mm screws from the back & tail light.

4. Using both hands, carefully pull the brake & tail light off.

5. Here is the tail light assembly.
6. The left one is for the brake light.
7. The right one is for the back-up light.

8. Twist and turn the backup light to the right. And then pull it out.
9. Make sure not to touch the surface of the light bulb because it will break the light bulb easily.

10. Twist and turn the brake light to the right and pull it out.
11. Make sure not to touch the surface of the light bulb because it will break the bulb easily.

12. Replace the light bulbs.
13. Check that the light bulbs work first before replacing 10 mm screws.