HP Elite X2 1013 G3 Camera Replacement

ID: 145108

Description: This guide will show you how to remove the...

Steps:

1. Flip the device over so the base is facing the ceiling.
2. Lift up the tablet stand.
3. Remove the four 2 mm screws from the tablet using a T5 Torx screwdriver.

4. Flip the tablet over with the screen facing upwards.
5. Place the suction handle in the center of the screen and slowly lift off the screen until it is at a 30 degree angle, starting by gently prying up the bottom.
6. Do not pull the screen beyond a 30 degree angle. Additional internal components must be disconnected first.

7. With the screen lifted at a 30 degree angle, gently disconnect the yellow ribbon cable at the end connected to the screen.
8. Gently disconnect the orange ribbon cable at the end connected to the bottom plate.

9. Remove the screen from the tablet.

10. Place the tip of an opening tool beneath the camera housing.
11. Slowly move the tool up and down until the camera pops off the laptop.
12. Remove the connector and lift the camera away from the laptop.