2012-2018 Toyota Corolla Windshield Wiper Replacement

ID: 145154

Description: This guide will teach you how to replace a...

Steps:

1. Lift up the windshield wiper you're replacing.

2. Insert a flathead screwdriver into the locking mechanism of the wiper and gently pry it open.
3. You can use your car keys in case you do not have a screwdriver.

4. Push the wiper blade downwards until it locks into place.

5. Angle the wiper away from you, so that the top is near you while the bottom is farther away.
6. Gently push the blade out of the wiper base.

7. Bring the new wiper blade into the wiper base from the car, aiming it so that the wiper base enters the lock hole.
8. Once the wiper blade is in, hold it from the bottom and push it upwards to secure the hold.
9. Make sure to start with the lock open, and that the blade is facing the same direction as the picture.

10. Push down the lock with force until it clicks.

11. Repeat for the second blade.
12. Your windshield wiper blade replacement is now complete!