Laila Ali Ionic Soft Bonnet Dryer LADR5604 Hose Replacement

ID: 145194

Description: Use this guide to replace the hose on your...

Steps:

1. Place the hair dryer on a sturdy surface with its backside facing up.
2. Using a Phillips #1 screwdriver, remove the six 12.7 mm screws from the back of the hair dryer.

3. Open the hair dryer, and place the front cover to the side.

4. Disconnect the clear tube from the hose cuff.

5. Untwist the hose cuff off the fan opening.

6. Pull the hose through the hose cuff until it reaches the top of the inner rim.

7. Place and twist the hose cuff onto the fan opening.

8. Slide the hose through the clear tube.
9. Slide the clear tube until it meets the rim of the hose cuff.

10. Place the hair dryer's front cover on top of the back cover, leaving a finger's width space for the next step.

11. Align the wire cover to the grooves of the left and right sides of the hair dryer.
12. Pull the cord through the wire opening.
13. Lightly press on the wire cover to secure its placement.
14. Push the front cover down to close the hair dryer.

15. Carefully flip the hair dryer on its backside.
16. Place a screw in each opening, and screw them until secure.

17. Gently pull the hose to ensure it is secure.