Logitech Slim Folio Battery Replacement

ID: 145390

Description: Use this guide to safely remove and replace the...

Steps:

1. Open your case and lay it out flat.

2. Grip the two case corners closest to the keyboard with your thumbs and pull them down, away from the iPad.
3. Remove the iPad from the case.

4. Fold the case in half, so the keyboard is facing up.
5. Locate the battery tray.

6. Insert the pointed end of a spudger or a small screwdriver into the access hole on the battery tray.
7. Push the spudger in, down, and pull the spudger towards you.
8. The battery tray should "click" open.

9. Insert the flat end of the spudger or a small flat head screwdriver into the top of the battery tray.
10. Push the battery tray out, away from the case, until you can grip it with your fingers.
11. If it's stuck, you may need to push on alternating sides to "walk" the tray out.

12. Remove the battery tray.

13. Flip the battery tray over.
14. Use the pointed end of the spudger to push both batteries out of the tray.
15. Remove the batteries.

16. To install new batteries:
17. Press one edge of a CR2032 coin cell battery against the contact arm, its text and "+" sign facing up.
18. Press to fully seat the battery.
19. Repeat for the second battery.