Slingbox 500 Top Cover Replacement

ID: 146595

Description:

Steps:

  1. Remove the sticker on the back of the Slingbox that covers the rear screws using a spudger.
    2. Step image
  2. Remove the seven 7.9 mm rear screws from the device using a Phillips #1 screwdriver.
  3. Flip your Slingbox so the bottom is facing upwards.
  4. Remove the four 7.9 mm screws using a Phillips #1 screwdriver.
  5. You may have rubber feet on the bottom of your Slingbox. If you do, just gently remove them with your hands and set them aside to put back on later.
    6. Step image Step image
  6. Remove the upper section of the case by rotating your Slingbox to view the back and lifting up on the higher corner.
  7. Use the opening tool to disconnect the small clips in the front.
  8. These may require some minor force to disconnect.
  9. Remove the entire top of the Slingbox and set it aside.
    10. Step image Step image Step image
Back