Yuneec ST16S Joystick Replacement

ID: 146613

Description: This guide explains how to replace the...

Steps:

1. Hold down the button located above the battery while applying downward pressure to the battery.

2. While still holding down the button, slide the battery out of its slot.

3. Remove the single screw from the battery compartment.

4. Remove the rubber bumpers from the back of the device using a spudger.

5. Remove the two screws located under each of the rubber bumpers.

6. Remove the three screws along the top of the device.

7. Carefully remove the backplate from the device.

8. Remove the four screws from around the joystick.

9. Unplug the joystick from the device.

10. Remove the joystick from the device.