Vivotek FD8169 Camera Module Replacement

ID: 146622

Description:

Steps:

1. Loosen the outside screw.

2. Press down on the side button, and lift up the top dome.

3. Remove three screws that connect the camera base to the motherboard using a Phillips #1 screwdriver.

4. Lift off the camera base from the motherboard.

5. Unscrew the cord from the motherboard.
6. Unplug the remaining connection.

7. Unscrew the camera from the camera base with a hex screwdriver on both sides.

8. Pull the camera out from the camera base.