General - How to repair broken parts

ID: 146858

Description: Cyan acrylate or super glue alone may join...

Steps:

1. You need cyan acrylate glue and glass sand with a particle size of 0.05 to 0.5 mm.
2. Glass sand has the advantage that it is alkaline and therefore the glue cures rapidly.

3. To speed up curing activator helps a lot.

4. Make sure, the glueing areas a free of dirt, dust and grease.

5. Add a little glue onto the damage area.

6. Scatter glass sand onto the glue and wait until it's cured. Eventually spray a little activator onto it.

7. Add more glue

8. Again scatter glass sand onto the glue. Alternating add glass sand and glue until the desired layer thickness has reached.

9. As soon as the desired layer thickness has reached and the glue is cured, the parts may be strained.