Garmin Oregon 450 On-Off-Switch Replacement

ID: 147231

Description: The on-off switch on the side is broken after...

Steps:

1. Cut away the broken rubber round until you see the switch like this.

2. Cut an eraser something like this.

3. Put the eraser in the hole
4. Test the switch if OK
5. cut again until it fits

6. Cut the tape
7. Tape it over the eraser

8. For a few years now, I have successfully used a self-adhesive patch for bicycle tubes as an alternative to duct tape. It is flexible, easy to cut and waterproof.