How to Open the Rotor Riot

ID: 147242

Description: Use this guide to open the Rotor Riot...

Steps:

1. Use your fingers to remove the screw on the back side of the controller securing the iPhone mount.
2. Remove the iPhone mount.

3. Use a T6 Torx screwdriver to remove the eight 9.2 mm-long screws securing the back cover.
4. Don't try to remove the back cover all the way yet! It's still connected to the mainboard.

5. Lift up the back cover of the controller.
6. Lift the back cover to a 45 degree angle and place it next to the controller.
7. Don't strain the interconnect cable during this procedure.

8. Use a spudger to disconnect the phone connector cable from the mainboard.

9. Remove the back cover.