JBL Link 10 battery Replacement

ID: 147520

Description:

Steps:

  1. jbl link 10 battery replacement
  2. peel the bottom cover off
  3. be careful not to damage the charging port
  4. remove the screws that are hidden underneath the base
  5. carefully remove the charging port
  6. be careful of the cables that are still connected to the motherboard.
  7. use a flat screwdriver or spudger to carefully pry up the plastic
  8. carefully unplug the old battery from the 6 pin connector on the motherboard
  9. -be extremely careful not to damage the connector.
  10. carefully take the old battery out.
  11. this should be easy if you are doing it correctly.
Back