Dangle Earrings Jump Ring Replacement

ID: 147574

Description: This guide will teach you to easily repair and...

Steps:

1. Locate where the earring stud/hook has detached.
2. Look at the two pieces of the dangle earrings for a small loop or jump ring on both pieces.

3. Using a chain nose plier, carefully grip the jump ring by its side.
4. Use a cutting plier to cut a small opening in the loop.

5. With both pliers use the cutting plier to gently grip the side of the small jump ring.
6. Using the small nose chain pliers pull back on the small jump ring to create an opening.

7. With the small chain nose pliers grip the jump ring.
8. Insert the stud/hook portion of the earring into the jump ring.

9. Use the jump ring to reattach the the stud.
10. With the small chain nose pliers grip the jump ring.
11. Insert the main portion of the earring into the jump ring with the stud/hoop.

12. Use both pliers to close the loop.
13. Firmly grip the edge of the loop using a pair of cutting pliers.
14. With a pair of small chain grip pliers gently push the end of the jump ring forward to close the loop.

15. Gently tug on either side of the earring to ensure the loop is closed securely.
16. If this test fails, refer back to step 6.