How to Replace a Bicycle Bell Disc

ID: 147602

Description: If your bicycle bell isn't ringing, it's likely...

Steps:

1. Unscrew the exterior bell housing by rotating clockwise, then remove the housing.

2. Rotate the parallel bars clockwise until they separate from the rod they're mounted on.

3. Remove the rubber discs.
4. Grab your new rubber discs and insert one at each end of the parallel bars.
5. Make sure center of the rubber discs are held in place by the pins.

6. Test and rotate the discs with your finger to see if it is the appropriate size.
7. If the disc does not rotate easily, change the size of your metal disc to a narrower one.

8. Rotate the parallel bars counterclockwise, into their original position.

9. Replace the exterior housing and rotate it counterclockwise until it's fully secure.