Furbo Dog Camera Back Cover Replacement

ID: 149171

Description: This guide will show you how to remove the rear...

Steps:

1. Remove the lid from the top of your Furbo Dog Camera.

2. Rotate your Furbo so that the bottom faces you.
3. Remove the rubber caps to reveal the four screws on the bottom of the Furbo.

4. Use a 2.5 mm Flathead screwdriver to remove the four 5 mm screws from the bottom of the Furbo.
5. Use a 2.5 mm Flathead screwdriver to remove the single 5 mm screw under the silver sticker.

6. Rotate your Furbo so that the side is facing towards you.
7. Use an opening tool to separate the two plastic coverings.

8. Once you have separated the two plastic coverings, remove one side by pulling on it and carefully separating it from the adhesive.