Epson PowerLite 77c Button Panel Replacement

ID: 149185

Description: The button panel controls all sorts of features...

Steps:

1. Use a Phillips #0 screwdriver to remove the seven 5.0 mm screws on the base panel.
2. Pick up the projector with both hands, sandwiching the top and bottom of the projector together, and place it right-side-up, with the ports facing you.
3. Lift the top panel up.
4. Two connectors are holding the top panel to the motherboard; be careful not to damage them as you lift the top panel.

5. Flip the locking bar of the ZIF connector vertically, then delicately remove the ribbon cable.
6. Grip the cable connector as close as possible to the plug, then pull it straight up until it releases from the motherboard.
7. Remove the top panel.

8. On the underside of the top panel, use a Phillips #0 to remove the four screws securing the button panel.

9. Remove the button panel.