Dell XPS 15 9500 SSD Replacement
ID: 149223
Description: This guide will show the steps required to...
Steps:
- Remove the eight 3.0 mm screws from the bottom panel with a T5 Torx screwdriver.
- Gently wedge an opening tool in the gap between the base panel and chassis, and pry vertically around the perimeter until it releases from the chassis.
- Lift the base panel up and away from the chassis.
- Use a Phillips #000 screwdriver to remove the single 3.0 mm screw on the right side of the SSD.
- Lift the card a few millimeters, then pull it directly out of its slot.
- If you wish to install a second SSD, there is an empty slot for an additional SSD underneath the copper cover. If you're just replacing the existing SSD, stop here.
- Use a Phillips #000 screwdriver to remove the one 3.0 mm screw on the left side of the SSD slot.
- Pull the cover out directly toward the left.