HP EliteBook Folio 1020 G1 Trackpad Replacement

ID: 149393

Description: Is your trackpad enabled yet not responding? If...

Steps:

1. Use a TR8 Torx screwdriver to remove:
2. Six 5.3 mm screws
3. Four 3.3 mm screws

4. Use a nylon spudger to gently pry the lower case up and off.

5. Unplug the white bundled cable connector that leads from the battery to the motherboard.

6. Use a Phillips #1 screwdriver to unscrew and remove the six 4 mm screws that secure the battery.

7. The trackpad is connected to the motherboard via a small ribbon cable. Lift the black tab on the ZIF cable connector, and gently pull the ribbon cable free.

8. Use a Phillips #1 screwdriver to unscrew and remove the four 2 mm screws that secure the trackpad.

9. Remove the trackpad.