HP EliteBook x360 830 G7 Solid State Drive Replacement

ID: 149451

Description: This guide will help you replace the solid...

Steps:

1. Turn the computer over so the back is facing up.
2. Use a Torx T5 screwdriver to remove the three 9 mm screws from the hinge of the device.
3. Use a Torx T5 screwdriver to remove the two 7 mm screws from the left and right mid-section of the case.
4. Lift the backplate from the computer.

5. Lift the metal shielding off of the solid state drive.

6. Use a Phillips #0 screwdriver to remove the 4 mm screw that secures the SSD.

7. Gently pull the SSD free from the M.2 socket.