HP EliteBook x360 830 G7 RAM Replacement

ID: 149452

Description: In this guide, you will learn how to replace...

Steps:

1. Turn the computer over so the back is facing up.
2. Use a Torx T5 screwdriver to remove the three 9 mm screws from the hinge of the device.
3. Use a Torx T5 screwdriver to remove the two 7 mm screws from the left and right mid-section of the case.
4. Lift the backplate from the computer.

5. Gently lift the larger, rectangular metal shielding off. This shielding covers the RAM.

6. Push down on the two latches on both sides of the RAM to release it.
7. This will allow you to remove the RAM and replace it with no issues.