Beats Solo 3 Charging Port Replacement

ID: 149498

Description: This is a charging port replacement guide for...

Steps:

1. Use a nylon or metal spudger to carefully remove the ear pad from the right ear cup.
2. Be careful to not rip the ear pad fabric with your tools.

3. Use a Phillips #00 screwdriver to remove the seven screws that hold the speaker in place.
4. There are two screws in the big red circle at the bottom.

5. Desolder all wires connecting the circuit panel to the rest of the device.
6. There are two wires in the big red circle at the bottom and one in the small red circle above.

7. After you desolder all wires you are able to remove and replace the charging port.