Asus Zenbook UX31A Wi-Fi Card Replacement

ID: 149521

Description: This guide will show you how replace the the...

Steps:

1. Use a T6 screwdriver to remove the ten 6 mm case screws.
2. The two screws adjacent to the device serial number stamps are longer than the others. These two screws run about 11 mm long.

3. Use a Phillips #00 screwdriver to remove the two 6 mm screws that secure the Wi-Fi card.
4. Wires are loose and easy to disconnect.

5. Gently pull the the Wi-Fi card from the motherboard.
6. Disconnect the white and black wire by gently pulling each one up.
7. They can be a little tricky to put back on so take your time and be gentle.