JBL Clip 3 Carabiner Clip Replacement

ID: 149544

Description: If your JBL Clip 3 clip mechanism is no longer...

Steps:

1. Insert the iFixit opening tool between the speaker grill and speaker housing and pry around the entire perimeter of the device until the grill releases.
2. A strong adhesive attaches the grill to the housing, and requires some time and patience to break. Use mild heat to loosen the adhesive if necessary.

3. Use a Phillips #1 screwdriver to remove the five 6.3 mm screws around the perimeter.

4. Separate the speaker housing from the rest of the body.
5. This requires minimal force; they are not glued together.

6. Use tweezers to remove the 2 pin and 4 pin connectors from the motherboard.

7. Lift the metal carabiner clip from the speaker housing.
8. They are not glued together and should separate easily.
9. There are alignment tabs on the clip so the whole assembly will only reassemble in one orientation.